Water Source Heat Pump Split Type/ water to water heat pump General characteristics:
1)LCD Control with induction key for Water Source Heat Pump Split Type/ water to water heat pump .
2) Electrical Auxiliary Heater 3/6/9kw for Water Source Heat Pump Split Type/ water to water heat pump
3)Time display( hour, date, year), real clock for Water Source Heat Pump Split Type/ water to water heat pump
4) Alarm system for Water Source Heat Pump Split Type/ water to water heat pump
5) Auto restart for Water Source Heat Pump Split Type/ water to water heat pump
6) Higher COP for Water Source Heat Pump Split Type/ water to water heat pump
7)High temperature water supply 45-60 Centigrade for Water Source Heat Pump Split Type/ water to water heat pump
8) New design panel for Water Source Heat Pump Split Type/ water to water heat pump
9) Multi-use for water heater, floor heater and radiator.
10) Brine system are built in 3 designs:
11) Standard flat-collectors are positioned 120 to 140 cm below ground level.
12) Trenches which use less surfaces for collectors
13)Earth taps with up to 100m depth use mainly geothermal energy recommened if there is not enough only little area in the garden.
14)Type:All in one type (with water tank inside) and split type( with water tank outside)
15)Capacity:6kw, 8kw, 10kw, 12kw, 16kw--- all in one type
12kw, 16kw, 20kw, 25kw, 33kw, 40kw-----split type.
16)Gas:R407C, R410A
17)Our product of ground source heat pump and water source heat pump can be connected with the boiler and solar water system. |
|
|
|
|
